<mark id="93x3p"></mark>

<b id="93x3p"></b>



        網址:www.whoiskeithjames.com時間:2023-05-08 14:53:46(部分內容來源于網絡,不代表本站觀點)

        Characteristics of Medium Frequency Induction Heating Furnace Series Permeating Furnace
        (1) Fast heating speed, high production efficiency, less oxidation and decarbonization, saving material and forging die costs.
        Due to the principle of medium frequency induction heating being electromagnetic induction, its heat is generated within the workpiece itself. Ordinary workers can continue working on forging tasks within ten minutes after working with a medium frequency electric furnace, without the need for professional workers to burn and seal the furnace in advance. There is no need to worry about the waste of heated billets in the coal furnace caused by power outages or equipment failures. Due to the fast heating speed of this heating method, there is very little oxidation. Compared to coal-fired furnaces, each ton of forgings saves at least 20-50 kilograms of steel raw materials, and its material utilization rate can reach 95%. Due to the uniform heating and minimal temperature difference between the core and surface, this heating method greatly increases the lifespan of the forging die in terms of forging, and the surface roughness of the forging is also less than 50um.
        (2) Excellent working environment, improved labor environment and company image for workers, pollution-free, and low energy consumption.
        Compared with coal stoves, induction heating furnaces eliminate workers from being baked and smoked by coal stoves in the scorching sun, and can better meet the various indicators and requirements of the environmental protection department. At the same time, they establish the external image of the company and the future development trend of the forging industry. Induction heating is the most energy-saving heating method in electric heating furnaces. Heating from room temperature to 1100 ℃ consumes less than 360 degrees of electricity per ton of forgings.